資料下載

您的位置

首頁 資料下載輸液器洩漏負壓測試儀說明英文版
輸液器洩漏負壓測試儀說明英文版
提 供 商: 上海遠梓電子科技有限公司 資料大小: JPG
圖片類型: JPG 下載次數: 0 次
資料類型: PDF 浏覽次數: 310 次
相關産品:
詳細介紹: 文件下載    圖片下載    

SF8368-B Infusion Leakage Negative Pressure Tester Instructions

 

 

1Overview:

SF8368-B Infusion Leakage Negative Pressure Tester is designed in accordance with the relevant clauses of national standard GB8368-2005. It is specially used to test infusion leakage performance.

 

2Technical parameters:

2.1 The environment

     Operating temperature540℃

     Relative humidity4580

Power supply voltage: 220V ± 22V

Grid frequency: 50HZ ± 1HZ

2.2Technical parameters

2.2.1Negative pressure detection: -10 ~ -30KPa. Error is less than ± 0.5KPa, LED digital display negative.

2.2.2Negative output:  -10 ~-30KPa ± 0.5KPa, LED digital display.

 2.2.3Maintaining negative pressure measurement system: within one minute shall not drift ± 0.5KPa.

 2.2.4 Test duration: 60S, error is less than ± 0.5KPa.

 

 

3. Usage:

After inhalation infusion nominal capacity of not less than 25% water, the tester negative output tube securely mounted on the infusion, the tester access network power, turn the power switch. After negative display figure is stable, press the start button, the tester will automatically be sucking air. When the negative pressure digital display is to -20KPa, the suction air is automatically stopped. Simultaneously start the time, duration 60 S, in this period, after the pressure is to be stabilized, observe the infusion and cannot produce bubbles (negative display digital value should not exceed the original 0.5KPa).

 

  1. Notice:

4.1 The operator must be familiar with the use of the equipment.

4.2 When the negative pressure display on the tester has been adjusted to -20KPa, it will automatically stop sucking air.

4.3 The duration of the relay has been adjusted at the factory for the 60s.

4.4 The tester implements to ‘Three Guarantees’ and the period is one year.

4.5 The tester measurement period is one year.

  1. Time relay setting method:

Time setting dial to 3, setting range is from 1s to 99s. According to the time setting, duration time can be adjusted.

 
  
上海遠梓電子科技有限公司版權所有 總訪問量:70110 地址:(工廠地址)江蘇昆山花橋鎮蓬青路888号立德企業家園1-01 郵編:
電話:010-57287526 傳真: 手機:15711100306 聯系人:劉子清 郵箱:yuanzidz@163.com
GoogleSitemap 技術支持:化工儀器網 管理登陸 滬ICP備12010883号-2
上海遠梓電子科技有限公司(dns686w.top)主營:醫用注射針測試儀,注射器測試儀,輸液器測試儀,醫用縫合針線測試儀,留置針測試儀,手術刀片測試儀
聯系人
在線客服
用心服務 成就你我